BGKKG - CARROL 3 CUT WHITE SHELLAC
- MSDS: BGKKG
- Manufacturer: N P
- Product Name: CARROL 3 CUT WHITE SHELLAC
- National Stock Number: 8010-01-070-4550
Product Identification
Contractor
Cage: 59973
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Effects of Overexposure:EYE, SKIN, THROAT IRRITANT. HEADACHE,
DROWSINESS, INTOXICATION
First Aid
First Aid:REMOVE TO FRESH AIR, GIVE ARTIFICIAL RESPIRATION IF
NECESSARY. WASH SKIN WELL. FLUSH EYES 15 MINUTES WITH WATER. CALL
DOCTOR. GIVE OXYGEN IF NECESSARY.
Fire Fighting
Flash Point:50F, 10C TCC
Lower Limits:4.3
Upper Limits:19.0
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:WATER WILL SCATTER AND SPREAD FIRE...DO NOT
USE
Unusual Fire/Explosion Hazard:KEEP FROM HEAT, SPARKS, FIRE, FLAME. USE
EXPLOSION-PROOF ELECTRICAL EQUIPMENT. VENTILATE AREA.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF HEAT SPARKS. DO NOT
BREATHE FUMES. AVOID BODILY CONTACT. CONTAIN SPILL IN DIKED AREA TO
MINIMIZE VAPORS
Handling
Handling and Storage Precautions:STORE BELOW 100F DEGREES. USE GLASS,
PLASTIC LINED STEEL OR TIN CONTAINERS TO TRANSFER MATERIAL
Other Precautions:NFPA BULLETIN 30 AND 77
Exposure Controls
Respiratory Protection:ALL PURPOSE CANISTER
Ventilation:LOCAL, MECHANICAL, FLOOR AND LOW AREAS
Protective Gloves:RUBBER
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
SOLVENT IS DENATURED ALCOHOL, TR590, DENATURED ALCOHOL
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:176F, 80C
Vapor Pres:44
Vapor Density:1.6
Spec Gravity:0.9
Evaporation Rate & Reference:1.7 N-BUTYL ACETAT
Solubility in Water:MODERATE
Appearance and Odor:VISCOUS LIQUID, NONRESIDUAL ODOR, COLOR MILKY WHIT
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Hazardous Decomposition Products:CARBON MONOXIDE
Disposal
Product ID:CARROL 3 CUT WHITE SHELLAC
MSDS Date:01/01/1985
FSC:8010
NIIN:01-070-4550
MSDS Number: BGKKG
Waste Disposal Methods:MAY BE BURNED IN COMBUSTION CHAMBER BY ENGINEER
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.